DIN Rail Mount

The DIN Rail Mount for Arduino lets you mount your Ruggeduino, Arduino Uno, Duemilanove, or compatible board to standard DIN rail. The unit easily snaps on and off the DIN rail and can be assembled to face left, right, up or down.

Tweet

 

• DIN Rail Mount for Arduino

  ../assets/images/AD150_01.gif

  The DIN Rail Mount for Arduino lets you mount your Arduino Uno, Duemilanove, or compatible board to standard DIN rail.

  

• Kit Contents

  ../assets/images/AD150_02.gif

  The DIN Rail Mount kit includes everything you need: pre-drilled 1/8" ABS adapter plate, DIN rail adapter, three M5 screws for mounting the plate to the adapter, four spacers and all necessary hardware (screws, nuts, etc. -- not shown) for mounting the Arduino to the plate.

  

• Flexible Orientation

  ../assets/images/AD150_03.gif

  The Arduino can be facing left, right, up or down given the flexible hole pattern on the adapter plate.

  

• Rugged Construction

  ../assets/images/AD150_04.gif

  The 1/8" ABS adapter plate holds the Arduino using #4 hardware and 1/4" spacers (included). The DIN rail adapter is held solidly onto the plate using three M5 screws that self-thread into the adapter.

  

• Quick Installation

  ../assets/images/AD150_05.gif

  The DIN Rail Mount assembly quickly and easily snaps on to DIN rail. Just hook the assembly onto the top part of the rail, then push down on the bottom to snap into place.

  

• Quick Removal

  ../assets/images/AD150_06.gif

  Removing the DIN Rail Mount assembly is easy to do by inserting a slot screwdriver or other flat tool underneath the adapter's lower lip then gently prying up.

  

$9.95

Features

The DIN Rail Mount for Arduino includes:

• Tough 1/8” ABS adapter plate with pre-drilled holes for mounting an Arduino and the DIN rail adapter
• DIN rail adapter
• Three M5 screws for attaching the adapter plate to the DIN rail adapter
• Four each 1/4” spacer, #4-40 screw, nut, washer, and lockwasher for attaching the Arduino to the adapter plate

The flexible hole pattern on the adapter plate allows you to mount the DIN rail adapter in several positions and orientations. This means the Arduino can be mounted to the DIN rail facing left, right, up or down.

The DIN Rail Mount assembles in minutes using only a screwdriver. The included M5 screws self-thread into the DIN rail adapter.

Consider using the DIN Rail Mount with our Quick Shield for quickly making connections.

The DIN Rail Mount was designed in the USA and comprises only lead-free components.

Proudly located in Michigan, USA Home | Products | Gallery | App Notes | Blog | Store | About Us | Custom Design Copyright © 2013 Rugged Circuits LLC